Huntington Beach Honda

Loading Flash Player......

Fox

Kuryakyn

MSR

Pro Taper

Joe Rocket

Cobra

Alpinestar

Acerbis

Shift

Icon

View All

Tires

Helmets

Footwear

Gloves

Exhaust

Apparel

Batteries

View All

Street

Scooter

Offroad

Watercraft

ATV

UTV/Side By Side

OEM Accessories

Snow

Marine

Eyewear

Helmet

Street Apparel

Offroad Apparel

Street Gloves

Offroad Gloves

Rainwear

Protective

Footwear

Casual Apparel

Packs & Bags

 


Police Bikes

Huntington Beach Honda partners with only the best in breed vendors that produce the equipment that makes the Honda ST1300PA platform the best Police Motorcycles for your department. You have the choice between small and large crash guards, lighting packages, enforcement equipment (citation book holders, Pro Laser III and LT holsters), weapons mounts for shotguns, AR-15, M-4 Carbine, MP-5ís, Etc... You need it, We build it! Custom Paint also available!

Request Demo Ask Marc Sam Photo Gallery

 

 Have it your way:

The versatility in the factory delivered HONDA ST1300PA allows your department to have your ST1300PA delivered uniquely suited to your department needs. Your department may require different lighting on the bike, paint scheme, enforcement equipment and weapons racks. So why would you want it delivered generically from the factory as one big compromise? Some departments deploy their bikes strictly for DUI enforcement. Some deploy their bikes for traffic investigation and others for highway traffic enforcement. Whatever your purpose for deploying your motor, we simply configure it your way and thatís the secret to our success. We offer built-to-order turn key Honda Police Motorcycles for delivery to anywhere in the United States.

Quality:

Huntington Beach Honda partners with only the best in breed vendors that produce the equipment that makes the ST1300PA platform the best Police Motorcycle for your department. You have the choice between small and large crash bars, lighting packages, enforcement equipment [citation book holders, Pro Laser III and LTI holsters] weapons mounts for shotguns, AR-15, M-4 Carbine, MP-5ís, you need it, we build it. Custom Paint, no problem!

One Stop Shopping:

Huntington Beach Honda does not stop with installation of emergency equipment, enforcement equipments, and lights. We can install your radio equipment, moving radar, vehicle video, OPTICON, and laptops! Our wiring philosophy is field tested on hundreds of ST1300PA in service throughout the West Coast. No single dealership in the United States has more Honda ST1300PAís on the road.

Value:

For less then the price of a factory delivered BMW you can have a turn key bike that suits your departmentís needs. Maintenance, no problem, itís a HONDA!

Features & Benefits

Unique features

  • ABS feature combines with LBS for a wide range of braking and steering control. ABS features an electric-motor-driven modulator that gives quick, precise braking pressure adjustments and smooth ABS operation. The system incorporates an integrated ECU controller, self-diagnostics with an interactive ECU test function, and automatic protection against system failure.
  • Linked Braking System(r) (LBS(r)) uses a second master cylinder and a proportional control valve (PCV) to couple the three-piston calipers of the dual-disc front and single-disc rear brakes for even better braking feel, while providing the peace of mind of an LBS system. Using the front brake lever activates the outer two pistons of the front calipers and the two outer pistons of the rear caliper. Rear pedal engagement activates the center piston of the rear brake caliper and the center pistons of the front calipers, and a delay valve slows initial front brake response to minimize front-end dive.
  • A motor-driven adjustable windscreen offers 7.4 inches and 13 degrees of adjustability for greater wind protection and touring comfort. A thumb-operated pushbutton on the left handlebar operates the windscreen motor. An additional 2.3 inches of manual adjustment is possible by repositioning the windshield on the mounting brackets.
  • New special patrol speedometer is graduated in 2 mph increments above 10 mph.
  • Adjustable 3-position dual-density solo seat.
  • Handlebars raised 20mm and width increased 13.5mm for rider comfort.
  • Specialized brackets for lights, sirens, antenna mount and radio/electronic equipment.
  • Rear component cover for electronics weather protection.
  • Left and right lower engine-guards have built-in brackets for mounting accessories.
  • Right-handlebar-mounted multi-function switch controls.
  • Two additional control switches are mounted on left side of fairing.
  • 8mm side fairing air deflector set.
  • Engine/Drivetrain

  • Compact, powerful 1261cc DOHC 90° V-4 produces 125bhp at 8000 rpm and 85 lb./ft. of torque at 6000 rpm. Longitudinal engine mounting eliminates an inefficient 90-degree turn in the power flow for improved drivetrain efficiency.
  • The ST1300's low overall center of gravity contributes to improved low-speed handling. The 360 degree crank contributes to a very broad powerband. Two engine counterbalancers virtually eliminate primary and secondary vibration. Both gear-driven counterbalancer shafts are installed in the lower crankcase, to the left side of the crankshaft. The first shaft is driven directly by the crankshaft at a 2:1 ratio. The second shaft is positioned below the first and is driven in the opposite direction by the first balancer shaft's drive gear. The combination of these two balancers assures a supremely comfortable ride.
  • Aluminum composite cylinder sleeves are high-pressure-formed from sintered aluminum powder impregnated with ceramic and graphite. The composite sleeves provide better wear resistance and superior heat dissipation compared to conventional sleeves.
  • Large, 31mm intake valves and 27mm exhaust valves feed a combustion chamber with a 10.8:1 compression ratio.
  • Direct shim-under-bucket valve actuation system ensures high-rpm durability and allows 16,000-mile valve maintenance intervals.
  • Four 36mm throttle bodies.
  • High-pressure PGM-FI delivers fuel at 50 psi into each injector.
  • Fuel is delivered through eight holes in each injector, producing a very fine spray and a highly combustible air/fuel charge for maximum combustion efficiency and power.
  • PGM-FI combines a sophisticated throttle sensor, advanced 3-D digital fuel injection and ignition mapping and precisely metered fuel delivery to produce smooth and linear throttle response.
  • ECU-controlled closed-loop emission control system utilizes two oxygen sensors to constantly deliver a precise air/fuel mixture, while two exhaust catalyzers further reduce emissions of carbon monoxide, hydrocarbons and oxides of nitrogen.
  • Auto-enriching system is integrated into PGM-FI module, optimizing the air/fuel mixture on cold starts and eliminating the need for a manual choke.
  • Four-into-two stainless steel exhaust system features a pair of attractive triangular-section, 5.4-liter mufflers with stainless steel heat shields.
  • Dampers on the transmission mainshaft, clutch and drive shaft reduce noise, vibration and driveline lash.
  • High-output, 660-watt air-cooled alternator is relocated between the cylinder banks, contributing to a shorter and more compact engine design.
  • U-shape aluminum radiator has excellent cooling capacity, a ring-type fan draws air through the radiator at low speeds to ensure stable operating temperatures for consistent performance and long engine life.
  • Sturdy eight-plate hydraulic clutch.
  • Cassette-type five-speed transmission features gear ratios that allow for quick acceleration and excellent roll-on performance.
  • Quiet and reliable shaft-drive system is virtually maintenance-free.
  • Chassis/Suspension

  • Rigid aluminum upper triple-clamp and a 45mm Honda Multi-Action System(tm) (HMAS(tm)) cartridge front fork provide excellent suspension control in a wide range of riding conditions.
  • The rear suspension incorporates a single shock, which mounts directly on the swingarm. The shock offers 1.2 inches of spring preload adjustability.
  • Large 310mm stainless steel floating front brake discs and 316mm rear disc for ultimate stopping power.
  • Wheels are three-spoke U-section cast aluminum. 5.0-inch-wide rear wheel sports a large, low-profile 170/60ZR-17 radial tire. The 3.5-inch-wide front wheel carries a 120/70ZR-18 radial tire.
  • Additional Features

  • Full-coverage bodywork offers superb wind and weather protection, low noise and superior high-speed aerodynamics.
  • Integrated lockable and detachable saddlebags hold 35 liters each. The saddlebags contain straps to limit bag opening to 90 degrees to better secure the contents. The straps are easily unbuckled when the bags are dismounted, permitting full access.
  • Rugged, plastic-covered body-protector stays extend outward to protect the bodywork in case of a tip-over.
  • Dual-section fuel tank places 5.5 gallons of fuel in the conventional tank location with an additional 2.2 gallons located in a sub-tank located low in the chassis. This results in an increase in fuel capacity and creates an even weight distribution for fuel.
  • Electric fuel pump operates inside the sub-tank, providing consistent fuel pressure for the PGM-FI system.
  • Headlight features dual lenses with twin-filament H4 low/high beam bulbs and multi-reflectors.
  • A convenient push button located on the left side of the fairing electrically adjusts the headlight angle over a 2.5-degree range.
  • A locking left-side fairing pocket offers the carrying capacity of an automobile console; a weather-resistant vinyl flap covers the right-side pocket.
  • Breakaway rear view mirrors minimize damage in the event of a tip over.
  • Convenient centerstand assist-lever folds neatly away when not in use.
  • Integrated front and rear turn signals.
  • Integrated ignition switch/fork lock. A single ignition key operates all locks.
  • Non-transferable three-year, unlimited-mileage limited warranty.
  • Specifications

  • Model: ST1300P
  • Engine Type: 1261cc liquid-cooled longitudinally mounted 90° V-4
  • Bore and Stroke: 78mm x 66mm
  • Compression Ratio: 10.8:1
  • Valve Train: DOHC; four valves per cylinder
  • Carburetion: PGM-FI with automatic enricher circuit
  • Ignition: Computer-controlled digital with three-dimensional mapping and electronic advance
  • Transmission: Five-speed
  • Final Drive: Shaft

    Suspension

  • Front: 45mm HMAS cartridge fork; 4.6 inches travel
  • Rear: HMAS gas-charged single shock with five-position spring preload adjustability; 4.8 inches travel

    Brakes

  • Front: Dual full-floating 310mm discs with LBS three-piston calipers
  • Rear: Single 316mm disc with LBS three-piston caliper
  • With ABS Tires
  • Front: 120/70ZR-18
  • Rear: 170/60ZR-17
  • Wheelbase: 58.7 inches
  • Rake (Caster Angle): 26.0°
  • Trail: 98mm (3.9 inches)
  • Seat Height: 31.1 inches (+/- 0.6 inches)
  • Dry Weight: 679 pounds
  • Fuel Capacity: 7.7 gallons
  • Color: White
  • Meets 2008 CARB emissions standards.

  • Law Enforcement

    Honda Generators

    Financing

    FOURSQUARE

    SOCIAL MEDIA

    First Name:

    Last Name:

    E-mail:

    SHOEI Helmets

    HJC Helmets

    FOX Racing

    Joe Rocket

    ICON Apperal

    ALPINESTAR

    SHIFT Apperal 

    Honda InterNational Orders




    Like us on Facebook! Home Follow us on Twitter! Check in on FourSquare! Find us on CycleTrader! Review Us on Yelp! Honda Powersports HB Honda Generators